http://www.tracopower.com page 1 of 3 dc/dc converters tmr 6 series, 6 watt features highest power density in sip package wide 2:1 input voltage range ultra-compact sip-8 package smallest footprint 6w converter full smd design temperature range C40 to +65c high effciency up to 86% indefnite short-circuit protection i/o isolation 1500 vdc remote on/off control fully rohs compliant 3-year product warranty the tmr-6 series is a new family of isolated 6w dc-dc converter modules with regulated output, featuring wide 2:1 input voltage ranges. the product comes in a ultra-compact sip-8 plastic package with a small footprint occupying only 2.0 cm2 (0.3 square in.) of board space. an excellent effciency allows C40 to +65c operation temperatures. further fea - tures include remote on/off control and continuous short circuit protection. the very compact dimensions of these converters make them an ideal solution for many space critical applications in communication equipment, instrumentation and indus - trial electronics. order code input voltage range output voltage output current max. effciency typ. tmr 6- 0510 3.3 vdc 13 0 0 m a 77 % t m r 6 - 0 511 5 vdc 120 0 m a 81 % tmr 6- 0519 9 vdc 666 ma 83 % tmr 6- 0512 12 v d c 500 ma 84 % tmr 6- 0513 4.5 C 9.0 vdc 15 vd c 400 ma 84 % tmr 6- 0515 (5 vdc nominal) 24 vdc 250 ma 84 % tmr 6-0521 5 vdc 600 ma 81 % tmr 6-0522 12 v d c 250 ma 84 % tmr 6-0523 15 vd c 200 ma 84 % tmr 6-1210 3.3 vdc 1300 ma 78 % tmr 6-1211 5 vdc 1200 ma 83 % tmr 6-1219 9 vdc 666 ma 84 % tmr 6-1212 12 vdc 500 ma 85 % tmr 6-1213 9 C 18 vdc 15 vdc 400 ma 85 % tmr 6-1215 (12 vdc nominal) 24 vdc 250 ma 84 % tmr 6-1221 5 vdc 600 ma 82 % tmr 6-1222 12 vdc 250 ma 83 % tmr 6-1223 15 vdc 200 ma 84 % tmr 6-2410 3.3 vdc 1300 ma 78 % tmr 6-2411 5 vdc 1200 ma 83 % tmr 6-2419 9 vdc 666 ma 84 % tmr 6-2412 12 vdc 500 ma 85 % tmr 6-2413 18 C 36 vdc 15 vdc 400 ma 86 % tmr 6-2415 (24 vdc nominal) 24 vdc 250 ma 85 % tmr 6-2421 5 vdc 600 ma 82 % tmr 6-2422 12 vdc 250 ma 84 % tmr 6-2423 15 vdc 200 ma 84 % tmr 6-4810 3.3 vdc 1300 ma 78 % tmr 6-4811 5 vdc 1200 ma 82 % tmr 6-4819 9 vdc 666 ma 84 % tmr 6-4812 12 vdc 500 ma 85 % tmr 6-4813 36 C 75 vdc 15 vdc 400 ma 86 % tmr 6-4815 24 vdc 250 ma 84 % tmr 6-4821 (48 vdc nominal) 5 vdc 600 ma 82 % tmr 6-4822 12 vdc 250 ma 84 % tmr 6-4823 15 vdc 200 ma 85 % models u l 60950 -1
http://www.tracopower.com page 2 of 3 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. dc/dc converters tmr 6 series 6 watt input specifications input current at no load 5 v models: 105 ma typ. (nominal input voltage) 12 v models: 55 ma typ. 24 v models: 30 ma typ. 48 v models: 15 ma typ. surge voltage (100 msec. max.) 5 v models: 15 v max. 12 v models: 36 v max. 24 v models: 50 v max. 48 v models: 100 v max. input filter capacitor type (application note for compliance to en 55022 class a/b pending) recommended input fuse 5 v models: 3.15 a (normal blow, max. rating) 12 v models: 1.4 a 24 v models: 700 ma 48 v models: 315 ma esd (electrostatic discharge) en 61000-4-2, air 8 kv, contact 6 kv, perf. criteria a radiated immunity en 61000-4-3, 10 v/m, perf. criteria a fast transient / surge (with external input capacitor) en 61000-4-4, 2 kv, perf. criteria a en 61000-4-5, 2 kv perf. criteria a C external input capacitor 5 vin models: nippon chemi-con ky 330 f, 50 v, esr 55 mohm other models: nippon chemi-con ky 220 f, 100 v, esr 48 mohm conducted immunity en 61000-4-6, 10 vrms, perf. criteria a output specifications voltage set accuracy 1 % max regulation C input variation vin min. to vin max. 0.2 % max. C load variation 0 C 100% single output models: 1.0 % max. dual output models: 1.0 % max. balanced load C load cross regulation 25/100% 5.0 % max. (dual output models) minimum load 0 % of rated max. load ripple and noise (20 mhz bandwidth) 50 mvpk-pk max. transient response setting time (25% load step change) 500 s typ. short circuit protection indefinite, automatic recovery start up time C power on 30 ms typ. (constant resistive load) C remote on 30 ms typ. capacitive load 3.3 vdc / 5 vdc output models: 6600 f max. / 3300 f max. 9 vdc output models: 2000 f max. 12 vdc / 15 vdc output models: 1600 f max. / 1400 f max. 24 vdc output models: 680 f max. 5 vdc / 12 vdc output models: 2000 f max. / 900 f max. 15 vdc output models: 660 f max. general specifications temperature ranges C operating C40c to +65c (without derating) C case temperature +90c max. C storage C55c to +125c load derating 5 %/k above 65c thermal shock, mechanical shock & vibration en 61373, mil-std-810f C test conditions www.tracopower.com/products/mil810.pdf humidity (non condensing) 95 % rel. h max. temperature coefficient 0.02 %/k
page 3 of 3 dc/dc converters tmr 6 series 6 watt outline dimensions pin single dual 1 Cvin (gnd) Cvin (gnd) 2 +vin (vcc) +vin (vcc) 3 remote on/off remote on/off 5 no function no function 6 +vout +vout 7 Cvout common 8 no function Cvout pin-out re v. 12/12 general specifications reliability, calculated mtbf (mil-hdbk-217f, at +25c, ground benign) >2.4 mio h isolation voltage (60sec.) C input/output 1500 vdc isolation capacitance C input/output 50 pf max. isolation resistance C input/output (500 vdc) >10 gohm switching frequency 100 khz min. (pfm) remote on/off C on: open or high impedance C off: 2...4 ma current applied via 1kohm resistor C off stand by input current 2.5 ma max. safety standards iec/en 60950-1, ul 60950-1 altitude during operation 4000 m max. (13120 f t ) approved environmental compliance C reach www.tracopower.com/products/tmr6-reach.pdf C rohs rohs directive 2011/65/eu physical specifications casing material non-conductive plastic potting material silicon, ( ul 94v-0 rated) weight 4.8 g ( 0.17o z ) specifcations can be changed any time without notice. dimensions in [mm], () = inch tolerances: 0.5 (0.02) pin pich tolerances: 0.25 (0.01) application note: www.tracopower.com/products/tmr6-application.pdf pending bottom view 3.2 (0.13) 0.5 (0.02) 0.25 (0.01) 2.0 21.8 5.08 3 x 2.54 0.5 (0.02) 11.2 (0.44) (3 x 0.1) (0.08) (0.2) 4.1 2 x 2.54 (2 x 0.1) (0.86) (0.16) 9.1 (0.36) 12 35 67 8 pending jenatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com
|
